Developer Replacement - Ricoh FT6645 Manual

23 April 1993

3.2 DEVELOPER REPLACEMENT

1. Take out the development unit. (Refer to Development Unit Removal.)
2. Place the development unit on the sheet [A] included with new developer.
3. Remove the two screws [B] fixing the toner hopper [C].
4. Turn the toner hopper 90 degree, then move it up to remove it from the
development unit.
5. Turn over the development unit then turn the paddle roller knob [D] to
empty developer onto the sheet. (The one way clutch in the knob [D]
allows turning the paddle roller counterclockwise only.)
NOTE: Dispose of used developer according to local regulations.
Make sure that no developer remains on the development rollers or in the
development unit.
DEVELOPMENT AND TONER SUPPLY
[D]
5-41
[B]
[C]
[A]