COPIER INSTALLATION
23. Install the shutter inner cover [A] (1 screw).
24. While pushing the lever [B], set the shutter cover [C].
25. Set a toner bottle by following the instructions on the decal.
NOTE: Before plugging in the power cord, install the guidance ROMs.
(–26, –27 machines) (See page 3-12)
26. Plug in the power cord, then turn on the main switch. The machine
automatically enter the process control data initial setting mode.
NOTE: Do not make any copy until completing developer initial setting.
Do not turn off the main switch during the process control data initial
setting mode.
[A]
3-10
23 April 1993
[C]
[B]