Ricoh FT6645 Manual page 344

23 April 1993
[C]
[E]
1. Enter SP mode (refer to Service Program Access Procedure) and access
SP Adjustment mode.
1
2. Access the appropriate page by touching the "Prev." [A] or "Next" [B] key.
3. Touch the "Copy in SP" key [C] then select the proper copy mode.
4. Make a copy of the OS-A3 chart.
5. Confirm if copy quality is within the adjustment standard.
6. If the copy quality is not correct, touch the "SP Mode" key [D] at the left
upper corner of the LCD panel.
7. Touch the – key [E] or the + key [F] to change the data, then repeat steps
3 to 6 until the copy quality becomes within the adjustment standard.
8. Exit the SP mode.
[A]
[D]
5-119
DUPLEX UNIT
[B]
[F]