Ricoh FT6645 Manual page 227

EXTERIOR AND INNER COVER REMOVAL
1.2 REAR SIDE
1.2.1 Upper Rear Cover
and [B].
After the upper rear cover is re-installed, set the fiber optics
NOTE:
connectors [A] and [B] so that the fiber optic cable [A] is located
over the electrical cable [B]. Also, the fiber optic cable [A]
should not bend while opening and closing the DJF or RDH.
3. Remove the upper rear cover [C]. (4 screws)
Lower Rear Cover
Remove the lower rear cover [D], (6 screws)
1.
When installing the lower rear cover, set the hooks in the holes
NOTE:
on the right and left side covers.
5 - 2
23 April 1993