Ricoh FT6645 Manual page 318

23 April 1993
[C]
[A]
- Used as fixed tray for paper longer than A4/Letter sideways -
1. Draw out the tandem tray.
2. Remove the rear and the front side fences [A] (1 screw and 1 push-lock
pin each) on the right tandem tray.
3. Remove the end fences [B] on both the rear and the front side fences (2
screws each).
NOTE: It is not necessary to re-install the end fences.
4. Install both side fences to the appropriate position according to the paper
size (one screw and one lock pin for each side fence).
NOTE: Support plates [C] are used only for A4, B5, and letter lengthwise
sizes.
Keep the end fences and support plates for future use.
[B]
5-93
[C]
[A]
PAPER FEED