Tandem Side Fence Motor Removal - Ricoh FT6645 Manual

PAPER FEED

6.5 TANDEM SIDE FENCE MOTOR REMOVAL

(A096 copier only)
[B]
[A]
1. Open the side fences [A] and raise the bottom plate [B] of the right
tandem tray.
2. Remove the lift arm [C] (2 screws).
3. Remove the cover [D] (1 screw).
4. Remove the bracket [E] (2 screws [F]).
5. Remove the side fence drive motor [G] (2 screws [H] and 2 nuts).
NOTE: When installing the side fence drive motor, move both side
fences to the innermost position, then set the motor gear
between the two rack gears [I].
[F]
[A]
[I]
[D]
[H]
[G]
5-72
23 April 1993
[F]
[E]
[C]