TRANSFER BELT UNIT
[H]
[A]
[C]
[B]
[F]
5. Turn the belt drive roller holder [A] clockwise (front view).
6. Replace the transfer belt [B].
NOTE: 1) Before installing the transfer belt, clean both sides of the
transfer belt with a dry cloth (do not use alcohol).
2) Before installing the transfer belt, clean the following items
with alcohol.
•
•
•
•
3) Position the transfer belt at the center of the belt roller [D].
(Both marks [G] should be visible.)
4) Set the transfer belts inside the bias terminals [H].
[H]
[E]
Belt drive roller [C]
Belt roller [D]
Bias roller [E]
Discharge terminal [F]
[D]
[G]
[H]
5-64
23 April 1993