Ricoh FT6645 Manual page 302

23 April 1993
5. Remove the knobs [A] (1 screw each) then remove the right inner cover
[B] (2 screws).
6. While holding the shaft [C] with an Allen key, remove the fixing screw [D],
then remove the knob [E],
7. Remove the magnet [F].
screws).
9. Remove the two connectors [H].
10. Remove the support bracket [1] (1 screw).
NOTE: The support bracket is used only for the first feed station.
5 - 7 7
PAPER FEED