Fusing Thermofuse Replacement - Ricoh FT6645 Manual

FUSING UNIT

7.3 FUSING THERMOFUSE REPLACEMENT

[B]
1. Remove the fusing unit upper cover. (Refer to Fusing Thermistor
Replacement.)
2. Remove the terminal bracket [A] (2 screws, 1 hook).
3. Disconnect the two connectors [B].
4. Replace the fusing thermofuse [C] (1 screw).
NOTE: When re-assembling the fusing unit, secure the harness in the
clamps correctly.
[A]
5-98
[C]
[B]
23 April 1993