Operation Panel - Ricoh FT6645 Manual

EXTERIOR AND INNER COVER REMOVAL

1.5 OPERATION PANEL

1. Turn off the main switch.
2. Remove the left door. (Refer to Left Door Removal.)
3. Remove the left inner cover. (Refer to Left Inner Cover Removal.)
4. Open the right door.
5. Open the toner bottle.
6. Remove three screws [A].
7. Remove two screws [B] securing the protective earth wires.
8. Insert the screw driver through the hole [C] and push the operation panel
[D] up.
9. Disconnect the connector [E].
NOTE: Be sure not to damage the harness by pulling the connector too
strongly.
[B]
[A]
5-8
23 April 1993
[E]
[D]
[C]