Ricoh FT6645 Manual page 240

23 April 1993
2.5 ADS SENSOR REMOVAL
[B]
[C]
[D]
1. Remove the exhaust fan [A]. (Refer to Scanner HP Sensor Replacement.)
2. Remove the DJF/RDH connector bracket [B] (2screws).
3. Remove the ADS Sensor [C] with the cover [D] (1screw).
4. Replace the ADS Sensor [C] (2 screws).
5. Assemble the copier.
6. Turn on the main switch and enter SP mode, then perform the Auto ADS
initial setting ( SP Adjustment-PAGE 5).
1
[A]
5-15
OPTICS