23 April 1993
6.8 PAPER LIFT MECHANISM
[F]
When the tray is set in the machine, the machine detects this condition by
using several detection methods as shown in the table:
Feed station
1st
Tray set switch
2nd
Paper size switch
3rd
Tray set switch
When the machine detects that the paper tray is set in the machine, the lift
motor [A] rotates and the coupling gear [B] on the tray lift motor engages the
pin [C] of the lift arm shaft [D], then turns the tray lift arm [E] to lift the tray
bottom plate [F].
A095 copier
[A]
[D]
[E]
A096 copier
Tray set signal through the connector
Paper size switch
LCT set signal through the connector
2-75
PAPER FEED
[B]
[C]