Ricoh FT6645 Manual page 320

23 April 1993
6.17 UNIVERSAL TRAY PAPER SIZE CHANGE
At the factory, the universal paper tray is set as A4/8
Normally, paper size is changed by the customer by following the operating
instructions.
Only when the customer needs the A5/5
does a service representative need to change the paper size. In this case,
proceed as follows:
1. Install the front and rear side fences [A] (2 screws).
NOTE: These side fences are the same as the side fences used in the
550 sheet fixed paper tray.
These side fences are options, order them as service parts.
" x 8
1/2 1/2
[A]
5-95
PAPER FEED
" x 11" sideways.
1/2
" lengthwise paper size