Ricoh FT6645 Manual page 294

23 April 1993
6.3 PAPER FEED ROLLERS REPLACEMENT
1. Turn off the main switch.
2. Remove the paper tray where the feed rollers belong to. (Refer to Paper
Tray Removal.)
3. Remove the pick-up roller [A] (1 snap ring).
4. Remove the feed roller [B] (1 snap ring).
5. Remove the snap ring [C] fixing the separation roller [D] then separate
the separation roller [D] from the torque limiter [E].
NOTE: 1) The paper feed (pick-up, feed, separation) rollers used in the 1st ~
3rd feed units in the paper tray unit are different from the feed
rollers used in the by-pass feed table and 3.5K LCT.
2) Do not touch the surface of the rollers with oily hand.
[E]
[D]
5-69
[C]
PAPER FEED
[B]
[A]