23 April 1993
2.12 LENS VERTICAL DRIVE BELT REMOVAL
1. Remove the third scanner drive unit. (Refer to Third Scanner Drive Motor
Replacement.)
2. Remove the front bracket [A]. (Refer to Scanner Drive Wires
Replacement.)
3. Remove the lens unit [B]. (Refer to Lens Horizontal Drive Belt
Replacement.)
4. Loosen the two screws [C] fixing the tension pulley bracket [D].
5. Push the tension pulley bracket to the left (front view) then unhook the
timing belt.
[A]
[B]
5-37
[D]
[C]
OPTICS