Ricoh FT6645 Manual page 337

DUPLEX UNIT
8.4 SEPARATION CLUTCH/TRANSPORT CLUTCH REMOVAL
[E]
[D]
[A]
[C]
Before replacing both clutches, take out the duplex unit. (Refer to Duplex Unit
Removal.)
NOTE: When installing both clutches, be sure to set the stopper [A] to the
projection [B].
- Separation Clutch -
1. Remove the harness bracket [C] (1screw).
2. Remove the E-ring [D].
3. Replace the separation clutch [E].
- Transport Clutch -
1. Remove the E-ring [F].
2. Replace the separation clutch [G].
[G]
[F]
[B]
[B]
[A]
5-112
23 April 1993