Initializing the Developer
This is done automatically after you turn the
power on for the first time.
When it is finished, the LED on the Start key goes
green.
If the initialization does not finish correctly, you
can use SP 3014 001 to see what the problem is.
Make some test copies.
Then do the ACC procedure.
User tools > Maintenance > ACC > Start
There are 4 test patterns in this menu: one for
copier mode and three for printer mode. Do all
four of these tests.
Slide 57
When you turn on the machine, it is not necessary to check if the cover is open
or closed.
SP 3014 001: A code is displayed. (FSM
Control Error Conditions)
Appendices
57
Di-C1.5 Training
5. Appendix: Process