Exterior Component Removal; Exposure Glass And Operation Panel Removal - Ricoh FT7060 Field Service Manual

EXTERIOR COMPONENT REMOVAL

1. Exposure Glass and Operation Panel Removal

1. Remove the DF front cover [A] (2 screws) and the copier front top
cover [B] (3 screws).
- Exposure Glass -
2. Loosen the two screws securing the rear scale [C], and remove the glass
fixing plate [D] (1 screw).
3. Slide out the exposure glass [E] with the right scale. (Do not bend the
fiber-optic cables.)
- Operation Panel -
2. Remove the upper front cover [F] (2 screws).
3. Unplug the five operation panel connectors
ground wire [H].
4. Remove the operation panel [I] (5 screws).
3-1
12 July '86
[G] and disconnect the