Sensor (Output Pass Through) Lingering Jam Service Check - Lexmark T650 Service Manual

4062
Step
2 Check for obstructions in the media path between the base
machine and the output option.
Is the media path free from obstructions?
3 Check the sensor (output pass through) for proper
operation.
1. Enter the diagnostic mode
2. Select Output bin tests
3. Select Sensor test
4. Select Output bin x
5. Observe the line item "passthru"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
4 Check the above sensor for proper connection.
Is the above sensor connected properly?
5 Perform a print test using the output option.
Does the error continue?

Sensor (output pass through) lingering jam service check

Step
1 Check the output option for proper installation.
Is the above component properly installed?
2
Check for obstructions in the media path between the
Sensor (output pass through) machine and the media bin.
Is the media path free from obstructions?
2-142
Service Manual
Check
Check
Yes
Go to step 3. Remove
obstructions.
Go to step 5. Go to step 4.
Replace the Replace the
sensor (output connection.
pass through).
Go to "High
capacity stacker
sensor (pass
through)
removal" on
page 4-145.
Go to "5-bin
mailbox sensor
(pass through)
removal" on
page 4-90.
Go to "Output
expander sensor
(pass through)
removal" on
page 4-170.
Replace the output Problem solved.
option.
Yes
Go to step 2. Remove then
reinstall the output
option
Go to step 3. Remove
obstructions.
Previous
No
Next
Go Back
No