Mitsubishi Electric MELFA CR800-D Series User Manual page 18

3 MELFA Smart Plus card
3.2.1.2. Removing of the MELFA Smart Plus card
Here is the procedure for removing the MELFA Smart Plus card/card pack.
1) Turn off the controller.
2) Remove the MELFA Smart Plus card with the removal lever pushed up. Hold the handle of the MELFA
Smart Plus card and pull out the MELFA Smart Plus card in parallel with the controller.
Removing of the MELFA Smart Plus card is now complete.
3-8 Installing/removing and setting of the MELFA Smart Plus card
Removal lever
Figure 3-2 Removing of MELFA Smart Plus card/card pack
Handle