Mitsubishi MELSEC-Q Series User Manual page 219

10 COMMUNICATION BETWEEN THE MASTER STATION AND REMOTE
DEVICE STATIONS
10 - 10
(c) Executional condition settings
Set the "Condition Device" to "RX", the "Device Number" to "18", and the
"Execute Condition" to "OFF".
(d) Details of execution setting
Set the "Write Device" to "RY", the "Device Number" to "18", and the "Write
Data" to "OFF".
(11) Setting the eleventh condition
(a) Execute Flag setting
Set the "Execute Flag" to "Execute".
(b) Operational condition setting
Set the "Operational condition" to "Set new".
(c) Executional condition settings
Set the "Condition Device" to "RX", the "Device Number" to "19", and the "
"Execute Condition" to "ON".
(d) Details of execution setting
Set the "Write Device" to "RY", the "Device Number" to "19", and the "Write
Data" to "OFF".
(12) Setting results
The results of settings (1) to (11) are shown below.
MELSEC-Q
10 - 10