Local Station Network Parameter Settings - Mitsubishi MELSEC-Q Series User Manual

6 PARAMETER SETTINGS

6.3.3 Local station network parameter settings

6 - 12
(1) The following describes an example of the parameter settings. See (2) for actual
settings.
(2) Set the network parameters using the following procedure.
(a) Set the "No. of boards in" for which the network parameters are to be set.
Default value : None
Setting range: 0 to 4 (modules)
Example) Set 1 (module).
(b) Set the "Start I/O No." for the local station.
Default value : None
Setting range: 0000 to 0FE0
Example) Set 0000.
(c) Set the Parameter name using "Operational settings". (Even if the Parameter
name is not set, this will not affect the operation of the CC-Link system).
Default value : None
Setting range: 8 characters or less
Example) Set "CC-LinkL".
MELSEC-Q
6 - 12