Mitsubishi MELSEC-Q Series User Manual page 143

6 PARAMETER SETTINGS
6 - 11
(d) Set the remote register (RWw) refresh device using "Remote register
(RWw)".
Default value : None
Setting range: Device name - Select from M, L, B, T, C, ST, D, W,
Example) Set to D2000.
(e) Set the special relay (SB) refresh device using "Special relay (SB)".
Default value : None
Setting range: Device name - Select from M, L, B, D, W, R, SB or
Example) Set to SB0.
(f) Set the special register (SW) refresh device using "Special register (SW)".
Default value : None
Setting range: Device name - Select from M, L, B, D, W, R, SW or
Example) Set to SW0.
POINT
When setting the special relay (SB) and special register (SW) refresh devices to SB
and SW, respectively, specify so they do not overlap with the device numbers used
on the MELSECNET/H network.
R, or ZR.
Device number - Within the range of the device
points that the CPU has.
ZR.
Device number - Within the range of the device
points that the CPU has.
ZR.
Device number - Within the range of the device
points that the CPU has.
MELSEC-Q
6 - 11