Appendix 3 Dedicated Instruction - Mitsubishi q64rd User Manual

APPENDIX

Appendix 3 Dedicated Instruction

Appendix 3.1 Dedicated Instruction List and Available Device
App. - 6
(1) Dedicated instruction list
The following table lists the dedicated instructions that can be used with the
Q64RD/Q64RD-G.
Instruction
Switches to the offset/gain setting mode.
G(P).OFFGAN
Switches to the normal mode.
Reads the offset/gain values of the user range setting to
G(P).OGLOAD
the CPU.
Restores the offset/gain values of the user range setting
G(P).OGSTOR
stored in the CPU to the Q64RD/Q64RD-G.
POINT
When the module is mounted to a MELSECNET/H remote I/O station, the
dedicated instructions are not available.
(2) Available devices
The following devices are available for the dedicated instructions:
Internal devices
1
Bit
X, Y, M, L, F, V, B
1: Word device bit designation can be used as bit data.
Word device bit designation is done by designating Word device . Bit No. .
(Designation of bit numbers is done in hexadecimal.)
For example, bit 10 of D0 is designated as D0.A .
However, there can be no bit designation for timers (T), retentive timers (ST) and
counters (C).
Description
File register
Word
T, ST, C, D, W
MELSEC-Q
Reference
section
Appendix 3.2
Appendix 3.3
Appendix 3.4
Constant
R, ZR —
App. - 6