Mitsubishi MELSEC-Q Series User Manual page 298

APPENDIX
Processing at completion of the RLPASET instruction
167
Parameter setting change
Parameter
change instruction
191
206
210
RLPASET instruction
· Control data
212
· Slave station setting data
240
· Send, receive and automatic refresh buffer assignment data
256
· Parameter registration (data link startup)
283
Processing at completion of the RLPASET instruction
291
D150 and D160 are dummy devices.
App - 37
MELSEC-Q
Turn the parameter setting
instruction off.
Instruct to refresh at normal
completion of the RLPASET
instruction.
Instruct to start the control
program at normal completion
of the RLPASET instruction.
Performs abnormal
completion processing
Instruct to stop data link.
Turn the data link stop
instruction off.
Instruct to stop refreshing.
Instruct to change parameters.
Clear complete status.
Slave station setting data/send,
receive and automatic refresh
buffer assignment data: Valid
Number of connected modules
involved in communication: 3
Number of retries: 3 times
Number of automatic return
modules: 1 module
Operation specification when
CPU is down: Stop
Scan mode specification:
Asynchronous
Delay time setting: 0
First: Local station, occupies
1 station, station
number 1
Second: Remote I/O station,
occupies 1 station,
station number 2
Third: Remote I/O station,
occupies 1 station,
station number 3
First (station number 1) local station
Send buffer: 64
First (station number 1) local station
Receive buffer: 64
First (station number 1) local station
Automatic refresh buffer: 0
Dedicated instruction
Turn the parameter setting
instruction off.
Instruct to refresh at normal
completion of the RLPASET
instruction.
Instruct to start the control
program at normal completion
of the RLPASET instruction.
Performs abnormal
completion processing
H
H
H
App - 37