Mitsubishi MELSEC-Q Series User Manual page 261

13 TROUBLESHOOTING
13 - 20
(5) H/W Information (when QJ61BT11 of function version A and
SW5D5C-GPPW-E or earlier are combined)
This function displays the operation and setting statuses of the master module,
local modules, and standby master module when QJ61BT11 of function version
A and SW5D5C-GPPW-E or earlier are combined.
(a) Setting procedure
Select the module by clicking "Diagnostics" - "System monitor...", and then
click "Module's Detailed Information ..." - "H/W Information ...".
(b)
(b) H/W LED Information
The following information will be displayed in the H/W LED information:
1) SW0058 (detailed LED display status)
2) SW0058 (detailed LED display status)
3) SW0059 (transmission rate setting)
(c) H/W switch Information
The following information will be displayed in the H/W switch information:
4) Set value for station number setting switch X10
5) Set value for station number setting switch X1
6) Set value for the transmission rate/mode setting switch
7) Station number for the corresponding module when the power is ON
8) Station number of the standby master station specified with a parameter.
(0000: Standby master station is not specified.)
9) SW0059 (transmission rate setting)
10) SW0060 (mode setting status)
1)
2)
3)
MELSEC-Q
7)
4)
8)
5)
9)
6)
10)
(c)
13 - 20