Mitsubishi MELSEC-Q Series User Manual page 280

APPENDIX
Device Item
b15 to b8 b7 to
(S3) + 0
0 RY
b15 to b8 b7 to
(S3) + 1
RWr 1 RX
b15 to
(S3) + 2
Completion mode
1: The same error code as that for the control data completion status is stored in the error code storage
device.
App - 19
1: See the manual for the intelligent device station to which data will be written.
2: Indicates the maximum number of data items that can be written.
Specify the buffer memory capacities of the intelligent device station and the
receive buffer area setting range to be set with a parameter.
Interlock signal storage devices
RY: Request device
b0
Set the upper 8 bits to 0.
RX : Completion device
b0
RWr : Error code storage device
If none, set to FF
0: Complete with the contents of 1 device (RXn).
1: Complete with the contents of 2 devices (RXn and
b0
RXn+1).
(RXn+1 turns ON at an abnormal completion.)
Set data
.
H
MELSEC-Q
Setting range Set by
0 to 127 User
0 User
0 to 127 User
0 to 15
User
FF
H
0/1 User
App - 19