Communicating With Intelligent Device Stations (Remote Net Mode) - Mitsubishi MELSEC-Q Series User Manual
Cc-link system master/local module, mitsubishi programmable logic controller
Hide thumbs
Also See for MELSEC-Q Series:
- Programming manual (1296 pages) ,
- User manual (814 pages) ,
- Reference manual (532 pages)
Table of Contents
Advertisement
4 FUNCTIONS
4.4.4 Communicating with intelligent device stations (Remote net mode)
4 - 52
The remote net mode allows communication with all stations (remote I/O stations,
remote device stations, local stations, intelligent device stations, and standby master
stations). Furthermore, it allows not only cyclic transfer, but also transient transmission,
which transfers data at an arbitrary timing, to intelligent and local stations.
[Setting method]
Set the remote net mode in "Mode" of the network parameters using the
GX Developer. For more details on the setting, see Section 6.3.
MELSEC-Q
4 - 52
Advertisement
Table of Contents
Troubleshooting
