Mitsubishi MELSEC-Q Series User Manual page 138

6 PARAMETER SETTINGS
6 - 6
(c) Set the Parameter name using "Operational settings." (Even if the Parameter
name is not set, this will not affect the operation of the CC-Link system).
Default value : None
Setting range: 8 characters or less
Example) Set "CC-LinkM".
(d) Set the input status for the data link error station using "Operational settings".
Default value : Clear ("Hold input data" not checked)
Setting range: Hold ("Hold input data" checked)
Example) Set to Clear ("Hold input data" not checked).
(e) Set the station type using "Type".
Default value : Master station
Setting range: Master station
Example) Set to Master station.
(f) Set the CC-Link mode using "Mode".
Default value : Online (Remote net mode)
Setting range: Online (Remote net mode)
Example) Set to Online (Remote net mode).
Clear ("Hold input data" not checked)
Master station (Duplex function)
Local station
Standby master station
Online (Remote I/O net mode)
Offline
MELSEC-Q
6 - 6