About Added/Changed Functions In Function Version B - Mitsubishi MELSEC-Q Series User Manual

1 OVERVIEW

1.3 About Added/Changed Functions in Function Version B

Function
Multiple PLC system
support has been added
Options of specifying 2
or 3 stations have been
added to the setting
range of the number of
occupied stations for a
local station
Addition of scan
synchronization function
at remote I/O net mode.
Support for automatic
CC-Link startup of
remote device stations
and intelligent device
stations has been added
Addition of a dedicated
instruction for parameter
setting
1 - 11
This section explains the functions that have been added to or changed in the
QJ61BT11 of function version B.
POINT
Please refer to the relevant reference section in order to check the following item.
How to check the function version and serial No. (see Section 2.2.4)
The following table lists the functions that have been added to or changed in the
QJ61BT11 of function version B.
Function version
serial No.
Allows monitoring of and reading/writing programs from/to
Function version B any CPU in a multiple PLC system mounted with the
QJ61BT11 via AJ65BT-G4-S3 or other station CPUs.
Allows setting a local station to any number of occupied
stations from 1 to 4.
Function version B
(QJ61BT11 of function version B is required not only for local
stations, but also for the master station.)
Allows specification of scan synchronization at remote I/O
Function version B
net mode.
Allows CC-Link startup and remote input/output as well as
refreshing of remote registers, etc. without setting the
Function version B parameters in a system configuration that includes not only
remote I/O stations, but also remote device stations and
intelligent device stations.
Function version B,
Allows setting the network parameters and starting the data
product that first 5
link by using the RLPASET instruction.
digits of the serial
It is possible to mount five or more QJ61BT11 modules and
No. are 03042 or
change the parameters while the PLC CPU is running.
later.
Function summary
MELSEC-Q
Reference
section
Section
4.4.12
—
Section 4.4.8
Section 4.4.3
Section 4.2.6
Appendix 2.7
1 - 11