Mitsubishi MELSEC-Q Series User Manual page 149

6 PARAMETER SETTINGS
6 - 17
(b) Intelligent function module switch setting
Click the Switch Setting button in the I/O
assignment setting screen to display the screen
shown to the left.
Set the input format to hexadecimal and enter
0100 for switch 4.
If switch 4 has not been set or a value other
than 0100 is entered, the RLPASET
instruction completes with an error.
In this case, the QJ61BT11 with the smallest
start I/O number seen from the PLC CPU
starts CC-Link automatically.
Do not make any settings other than for switch 4.
Normal operation cannot be guaranteed if
settings other than for switch 4 are made.
MELSEC-Q
6 - 17