Modular Port Concentrators And Interface Cards; Modular Port Concentrator (Srx5K-Mpc) Specifications - Juniper SRX5400 Manual

SRX5400, SRX5600, and SRX5800 Services Gateway Card Reference

Modular Port Concentrators and Interface Cards

Modular Port Concentrator (SRX5K-MPC) Specifications

18
Modular Port Concentrator (SRX5K-MPC) Specifications on page 18
MIC with 20x1GE SFP Interfaces (SRX-MIC-20GE-SFP) on page 21
MIC with 10x10GE SFP+ Interfaces (SRX-MIC-10XG-SFPP) on page 23
MIC with 1x100GE CFP Interface (SRX-MIC-1X100G-CFP) on page 25
MIC with 2x40GE QSFP+ Interfaces (SRX-MIC-2X40G-QSFP) on page 27
SRX5K-MPC3-40G10G Specifications on page 28
SRX5K-MPC3-100G10G Specifications on page 31
The SRX5K-MPC (see Figure 10 on page
MICs. These MICs add Ethernet ports to your services gateway. An MPC with MICs installed
functions in the same way as a regular IOC but allows you to add different types of
Ethernet ports to your services gateway. MPCs and MICs are similar in form and function
to Flex IOCs and port modules. However, the two use different form-factors, so you
cannot install port modules in an MPC, nor can you install MICs in a Flex IOC.
You must install at least one interface card in the services gateway. The interface card
can be of any of the available IOC, Flex IOC, or MPC types. You can add just one MIC; or
you can add two MICs of the same or different types.
You can install MPCs in any of the slots that are not reserved for Switch Control Boards
(SCBs).
If a slot in the SRX5400, SRX5600, or SRX5800 Services Gateway card cage is not
occupied by a card, you must install a blank panel to shield the empty slot and to allow
cooling air to circulate properly through the services gateway. If a slot in an MPC is not
occupied by a MIC, you must install a blank panel in the empty MIC slot to shield it and
to allow cooling air to circulate properly through the MPC.
19) is an interface card with two slots that accept
Copyright © 2016, Juniper Networks, Inc.