Omron SYSMAC CVM1-PRO01-V1 Operation Manual page 13

Application Precautions
xiv
• Disconnect the functional ground terminal when performing withstand voltage
tests.
• Be sure to confirm that no adverse effect will occur in the equipment before
executing Jog, Origin Search, Error Resetting, or Deceleration Stop.
• Be sure to confirm that no adverse effect will occur in the equipment before
changing the operation mode of the Teaching Box.
• Be sure to confirm that no adverse effect will occur in the equipment before
changing the present value.
• Be sure to confirm that no adverse effect will occur in the equipment before
changing the set value.
• Be sure to confirm that the set parameter or data operates properly.
• Be sure to confirm that no adverse effect will occur in the equipment before
executing the forced set/reset.
• Be sure to rewrite the flash memory after changing the position data or param-
eters.
• Do not turn OFF the power supply to the Unit while the flash memory is being
written. In the worst case, the flash memory may malfunction.
• Be sure to confirm that system parameters operate properly.
• Always turn OFF the power supply before mounting or dismounting Memory
Cassettes.
• Do not attempt to disassemble, repair, or modify any Units.
• Do not damage, pull on, apply excessive stresses to, place heavy objects on,
or pinch the cables.
• Do not pull on cables when transporting the Units.
4