Omron SYSMAC CVM1-PRO01-V1 Operation Manual page 83

Changing the Override Value
8-1 Changing the Override Value
Procedure
1, 2, 3...
OVER
1 1 1 .
74
This operation can be used to change the override value for each axis.
The current override value is displayed for each axis in real time.
Use the following procedure to change the override value.
1. Press the OVERRIDE Key.
CS1W-MC221/421, CV500-MC221/421
[OV]X
Y*
RIDE Z
U
An asterisk (*) indicates that the origin has not been defined.
Pressing the CLR Key from this initial display will return it to the previous
mode.
2. Press the CHG Key.
CS1W-MC221/421, CV500-MC221/421
[OV]X
Y*
CHG
Z
U
3. Using the Up and Down Keys, move the cursor to the value to be changed. In
this example, the cursor is moved to the Y axis value.
CS1W-MC221/421, CV500-MC221/421
[OV]X
Y*
Z
U
4. Using the numeric Keys, input a new override value between 0.1 and 199.9.
In this example, 111.5 is input.
CS1W-MC221/421, CV500-MC221/421
[OV]X
Y*
5
Z
U
If a wrong value is input, press the CLR Key. The previous override value will
return.
5. Press the WRITE Key to set the newly input data.
C200H-MC221
100.0 [OV]X
50.0
100.0
50.0
C200H-MC221
100.0 [OV]X
50.0 Y*
100.0
50.0
The cursor appears.
C200H-MC221
100.0 [OV]X
50.0
100.0
50.0
C200H-MC221
100.0 [OV]X
111.5
100.0
50.0
Section
100.0
Y* 50.0
100.0
50.0
100.0
Y* 50.0
100.0
Y* 111.5
8-1