Table of Contents
Advertisement
System Configuration
CV-series MC Unit
Connection
Used for trial
operation,
debugging,
teaching, etc.
Teaching Box
SYSMAC
CV-series
PC
Battery for absolute
encoder data back-
up (2.8 to 4.5 V)
(see note 3)
24-V power supply for interface
Dedicated Cables for
Either an ab-
OMRON-made H, M or
solute encod-
U-series Servomotors
er or an incre-
are available.
mental encod-
er can be
used.
The following example is for the CV500-MC421.
⋅ Monitor (present position,
I/O signals)
⋅ Origin search
⋅ Jogging
⋅ Error reset
⋅ Teaching
⋅ Etc.
MC Unit
CPU Unit
Dedicated Cables
for Driver
(see note 1)
Servodriver
General-purpose inputs: 4 pts
General-purpose outputs: 4 pts
Note
1. Dedicated Cables compatible with OMRON H, M, or U-series Servomotors
are available. The user can also provide their own cables.
2. A Dedicated Cable for connections to the Dedicated Terminals is available.
The user can also provide their own cable.
3. A data backup battery must be used when using an absolute encoder.
Used to set
data or for
G-language
programming.
Power Supply Unit
Peripheral bus
Host Link
Dedicated
Terminals
(see note 2)
External I/O
CCW limit input
CW limit input
Proximity input
Immediate stop input
For 4 axes
24-V power sup-
ply for interface
Section
⋅ Editing G language
programs
⋅ Monitoring status
⋅ File control
⋅ Etc.
IBM PC/AT or compatible:
SYSMAC Support Software
IBM PC/AT or compatible:
CX-Motion
MPG
MPG:
1 channel
5 to 15-V
power
supply for
interface
⋅ Axis
Used for fine
selection
positioning as
⋅
Multiplication
required during
factor
teaching.
selection
1-2
5
Advertisement
Table of Contents
