Omron SYSMAC CVM1-PRO01-V1 Operation Manual page 81

Saving Data
This message will appear even if the content of the data to be saved is the
same as the data already in flash memory (i.e., if the data has not changed).
Note If the data fails when writing to flash memory, the following message
will appear.
AN ERROR HAS OC
CURRED BY FLASH
MEMORY.
Press the CLR Key to return to the menu display in step 1.
Press the CLR Key. The EXTENSION mode menu will be returned. After re-
leasing memory protection by selecting "4. MEMORY PROTECT," re-at-
tempt the operation.
Section 7-8
71