Installing The Switch; Desktop Installation - Planet GS-5220 Series User Manual

2.2 Installing the Switch

This section describes how to install your Managed Switch and make connections to the Managed Switch. Please
read the following topics and perform the procedures in the order being presented. To install your Managed
Switch on a desktop or shelf, simply complete the following steps.

2.2.1 Desktop Installation

To install the Managed Switch on desktop or shelf, please follow these steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the Managed Switch.
Step 2: Place the Managed Switch on the desktop or the shelf near an AC power source, as shown in
2-2-1.
Step 3: Keep enough ventilation space between the Managed Switch and the surrounding objects.
When choosing a location, please keep in mind the environmental restrictions discussed in
Chapter 1, Section 4, and specifications.
Figure 2-2-1: Place the Managed Switch on the Desktop
User's Manual of GS-5220 LCD Series
77
Figure