• Frame Type
• Action
• Rate Limiter
• Port Redirect
Indicates the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
■
EType: The ACE will match Ethernet Type frames. Note that
■
an Ethernet Type based ACE will not get matched by IP and
ARP frames.
ARP: The ACE will match ARP/RARP frames.
■
IPv4: The ACE will match all IPv4 frames.
■
IPv4/ICMP: The ACE will match IPv4 frames with ICMP
■
protocol.
IPv4/UDP: The ACE will match IPv4 frames with UDP
■
protocol.
IPv4/TCP: The ACE will match IPv4 frames with TCP protocol.
■
IPv4/Other: The ACE will match IPv4 frames, which are not
■
ICMP/UDP/TCP.
IPv6: The ACE will match all IPv6 standard frames.
■
Indicates the forwarding action of the ACE.
Permit: Frames matching the ACE may be forwarded and
■
learned.
Deny: Frames matching the ACE are dropped.
■
Indicates the rate limiter number of the ACE. The allowed range is 1 to
16. When Disabled is displayed, the rate limiter operation is disabled.
Indicates the port redirect operation of the ACE. Frames matching the
ACE are redirected to the port number.
The allowed values are Disabled or a specific port number. When
Disabled is displayed, the port redirect operation is disabled.
335
User's Manual of GS-5220 LCD Series