The page includes the following fields:
Object
•
Port
Enable
•
Rate
•
Unit
•
Flow Control
•
Figure 4-9-1: QoS Ingress Port Policers Page Screenshot
Description
The port number for which the configuration below applies.
Controls whether the policer is enabled on this switch port.
Controls the rate for the policer. This value is restricted to 100-1000000
when the "Unit" is "kbps" or "fps", and it is restricted to 1-3300 when
the "Unit" is "Mbps" or "kfps".
The default value is 500.
Controls the unit of measure for the policer rate as kbps, Mbps, fps or
kfps .
The default value is "kbps".
If flow control is enabled and the port is in flow control mode, then
pause frames are sent instead of discarding frames.
User's Manual of GS-5220 LCD Series
296