Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
By default, the system automatically detects the speed and duplex mode used on each port, and configures the
path cost according to the values shown below. Path cost "0" is used to indicate auto-configuration mode. When
the short path cost method is selected and the default path cost recommended by the IEEE 8021w standard
exceeds 65,535, the default is set to 65,535.
Port Type
Ethernet
Fast Ethernet
Gigabit Ethernet
Port Type
Ethernet
Fast Ethernet
IEEE 802.1D-1998
50-600
10-60
3-10
Table 4-7-1: Recommended STP Path Cost Range
Link Type
IEEE 802.1D-1998
Half Duplex
100
Full Duplex
95
Trunk
90
Half Duplex
19
Full Duplex
18
Trunk
15
User's Manual of GS-5220 LCD Series
IEEE 802.1w-2001
200,000-20,000,000
20,000-2,000,000
2,000-200,000
240
IEEE 802.1w-2001
2,000,000
1,999,999
1,000,000
200,000
100,000
50,000