Planet GS-5220 Series User Manual page 147

Trap Config
•
Trap Mode
•
Trap Version
•
Trap Community
•
• Trap Destination
Address
• Trap Destination Port
• Trap Inform Mode
• Trap Inform Timeout
(seconds)
• Trap Inform Retry
Times
Indicates which trap Configuration's name for configuring. The allowed
string length is 0 to 255, and the allowed content is ASCII characters
from 33 to 126.
Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.

Disabled: Disable SNMP trap mode operation.

Indicates the SNMP trap supported version. Possible versions are:
SNMP v1: Set SNMP trap supported version 1.

SNMP v2c: Set SNMP trap supported version 2c.

SNMP v3: Set SNMP trap supported version 3.

Indicates the community access string when send SNMP trap packet.
The allowed string length is 0 to 255, and the allowed content is the
ASCII characters from 33 to 126.
Indicates the SNMP trap destination address.
Indicates the SNMP trap destination port. SNMP Agent will send SNMP
message via this port, the port range is 1~65535.
Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled: Enable SNMP trap authentication failure.

Disabled: Disable SNMP trap authentication failure.

Indicates the SNMP trap inform timeout.
The allowed range is 0 to 2147.
Indicates the SNMP trap inform retry times.
The allowed range is 0 to 255.
147
User's Manual of GS-5220 LCD Series