Advertisement
6. Installing the Switch
This part describes how to install your Gigabit Ethernet Switch and make
connections to it. Please follow the procedure below:
This Gigabit Ethernet Switch does not need software configura-
tion.
Desktop Installation
To install the Gigabit Ethernet Switch on the desktop, simply follow these
steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the
Gigabit Ethernet Switch.
Step 2: Place the Gigabit Ethernet Switch on the desktop near an AC power
source.
Step 3: Keep enough ventilation space between the Gigabit Ethernet Switch
and the surrounding objects.
When choosing a location, please keep in mind the environ-
mental restrictions discussed in Section 3 under Product Speci-
fications.
Step 4: Connect your Gigabit Ethernet Switch to network devices.
A. Connect one end of a standard network cable to the 10/100/1000BASE-T
RJ45 ports on the front of the Gigabit Ethernet Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers, etc.
Step 5: Supply power to the Gigabit Ethernet Switch.
A. Connect one end of the power cable to the Gigabit Ethernet Switch.
B. Connect the power plug of the power cable to a standard wall outlet.
When the Gigabit Ethernet Switch receives power, the Power LED should
remain solid Green.
9
Advertisement
