Planet GS-5220 Series User Manual page 275

Unregistered IPMCv6
•
Flooding enabled
• MLD SSM Range
• Leave Proxy Enable
• Proxy Enable
• Router Port
• Fast Leave
• Throtting
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Enable unregistered IPMCv6 traffic flooding.
The flooding control takes effect only when MLD Snooping is enabled.
When MLD Snooping is disabled, unregistered IPMCv6 traffic flooding is
always active in spite of this setting.
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range.
Enable MLD Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
Enable MLD Proxy. This feature can be used to avoid forwarding
unnecessary join and leave messages to the router side.
Specify which ports act as router ports. A router port is a port on the
Ethernet switch that leads towards the Layer 3 multicast device or MLD
querier.
If an aggregation member port is selected as a router port, the whole
aggregation will act as a router port. The allowed selection is Auto,
Fix, Fone, default compatibility value is Auto.
Enable the fast leave on the port.
Enable to limit the number of multicast groups to which a switch port
can belong.
275
User's Manual of GS-5220 LCD Series