4.2.18 Save Startup Config
This function allows to save the current configuration, thereby ensuring that the current active configuration can
be used at the next reboot as the screen in
Figure
4-2-23
will appear.
4.2.19 Configuration Download
The switch stores its configuration in a number of text files in CLI format. The files are either virtual (RAM-based)
or stored in flash on the switch.
There are three system files:
running-config: A virtual file that represents the currently active configuration on the switch. This file is
•
volatile.
startup-config: The startup configuration for the switch, read at boot time.
•
default-config: A read-only file with vendor-specific configuration. This file is read when the system is
•
restored to default settings.
It is also possible to store up to two other files and apply them to running-config, thereby switching
configuration.
Figure 4-2-22
Figure 4-2-22: Configuration Save Page Screenshot
Figure 4-2-23: Finish Saving Page Screenshot
135
User's Manual of GS-5220 LCD Series
appears. After saving the configuration, the screen in