Planet GS-5220 Series User Manual page 407

IP Address -
State -
Round-Trip radiusAuthClie
Time
ntExtRoundTrip
Time
407
User's Manual of GS-5220 LCD Series
IP address and UDP port for the authentication
server in question.
Shows the state of the server. It takes one of
the following values:
Disabled: The selected server is disabled.

Not Ready: The server is enabled, but IP

communication is not yet up and running.
Ready: The server is enabled, IP

communication is up and running, and the
RADIUS module is ready to accept access
attempts.
Dead (X seconds left): Access attempts

were made to this server, but it did not
reply within the configured timeout. The
server has temporarily been disabled, but
will get re-enabled when the dead-time
expires. The number of seconds left before
this occurs is displayed in parentheses. This
state is only reachable when more than
one server is enabled.
The time interval (measured in milliseconds)
between the most recent
Access-Reply/Access-Challenge and the
Access-Request that matched it from the
RADIUS authentication server. The granularity
of this measurement is 100 ms. A value of 0 ms
indicates that there hasn't been round-trip
communication with the server yet.