Tacacs - Planet GS-5220 Series User Manual

• Delete
• Hostname
• Auth Port
• Acct Port
• Timeout
• Retransmit
• Key
Buttons
: Click to undo the addition of the new server.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.11.7 TACACS+

This page allows you to configure the TACACS+ Servers. The TACACS+ Configuration screen in
4-11-8 appears.
To delete a RADIUS server entry, check this box. The entry will be
deleted during the next Save.
The IP address or hostname of the RADIUS server.
The UDP port to use on the RADIUS server for authentication.
The UDP port to use on the RADIUS server for accounting.
This optional setting overrides the global timeout value. Leaving it
blank will use the global timeout value.
This optional setting overrides the global retransmit value. Leaving it
blank will use the global retransmit value.
This optional setting overrides the global key. Leaving it blank will use
the global key.
: Click to ad
d a new RADIUS server. An empty row is added to the table, and the RADIUS
server can be configured as needed. Up to 5 servers are supported.
User's Manual of GS-5220 LCD Series
397
Figure