Planet GS-5220 Series User Manual page 460

Tx Reinit
•
LLDP Port Configuration
The LLDP port settings relate to the switch, as reflected by the page header.
Object
• Port
• Mode
When a port is disabled, LLDP is disabled or the switch is rebooted a
LLDP shutdown frame is transmitted to the neighboring units, signaling
that the LLDP information isn't valid anymore. Tx Reinit controls the
amount of seconds between the shutdown frame and a new LLDP
initialization. Valid values are restricted to 1 - 10 seconds.
Description
The switch port number of the logical LLDP port.
Select LLDP mode.
Rx only The switch will not send out LLDP information, but LLDP

information from neighbor units is analyzed.
Tx only The switch will drop LLDP information received from

neighbors, but will send out LLDP information.
Disabled The switch will not send out LLDP information, and will

drop LLDP information received from neighbors.
Enabled The switch will send out LLDP information, and will

analyze LLDP information received from neighbors.
460
User's Manual of GS-5220 LCD Series