• Daylight Saving Time
•
Start Time Settings
• End Time Settings
•
Offset Settings
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
This is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration.
Select 'Disable' to disable the Daylight Saving Time configuration. Select
'Recurring' and configure the Daylight Saving Time duration to repeat
the configuration every year. Select 'Non-Recurring' and configure the
Daylight Saving Time duration for single time configuration. ( Default:
Disabled ).
• Week - Select the starting week number.
• Day - Select the starting day.
• Month - Select the starting month.
• Hours - Select the starting hour.
• Minutes - Select the starting minute.
• Week - Select the ending week number.
• Day - Select the ending day.
• Month - Select the ending month.
• Hours - Select the ending hour.
• Minutes - Select the ending minute
Enter the number of minutes to add during Daylight Saving Time.
( Range: 1 to 1440 )
117
User's Manual of GS-5220 LCD Series