Configure Delete; Image Select - Planet GS-5220 Series User Manual

4.2.22 Configure Delete

The Configure Delete page allows to delete the startup-config and default-config files which are stored in FLASH.
If this is done and the switch is rebooted without a prior Save operation, this effectively resets the switch to
default configuration. Please refer to the Figure

4.2.23 Image Select

This page provides information about the active and alternate (backup) firmware images in the device, and
allows you to revert to the alternate image. The web page displays two tables with information about the active
and alternate firmware images. The Image Select screen in
In case the active firmware image is the alternate image, only the "Active Image" table is
shown. In this case, the Activate Alternate Image button is also disabled.
1.
2.
4-2-27
Figure 4-2-27: Configuration Delete Page Screenshot
If the alternate image is active (due to a corruption of the primary image or by
manual intervention), uploading a new firmware image to the device will
automatically use the primary image slot and activate this.
The firmware version and date information may be empty for older firmware
releases. This does not constitute an error.
User's Manual of GS-5220 LCD Series
shown below.
Figure 4-2-28 appears.
138