Planet GS-5220 Series User Manual page 357

Rate Limiter ID
•
• Port Redirect
• Logging
• Shutdown
• State
Select which rate limiter to apply on this port. The allowed values are
Disabled or the values 1 through 16.
The default value is "Disabled".
Select which port frames are redirected on. The allowed values are
Disabled or a specific port number and it can't be set when action is
permitted. The default value is "Disabled".
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System
■
Log.
Disabled: Frames received on the port are not logged.
■
The default value is "Disabled".
Please note that the System Log memory size and logging rate are
limited.
Specify the port shut down operation of this port. The allowed values
are:
Enabled: If a frame is received on the port, the port will be
■
disabled.
Disabled: Port shut down is disabled.
■
The default value is "Disabled".
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port
■
configuration of the ACL user module.
Disabled: To close ports by changing the volatile port
■
configuration of the ACL user module.
The default value is "Enabled".
357
User's Manual of GS-5220 LCD Series